 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com STA60K79S thru STA60K100S 60,000 WATTS PEAK PULSE POWER 79 - 1000 VOLTS HIGH VOLTAGE BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR Designer's Data Sheet * * * * * * * * * FEATURES: 79-1000 Volt Bidirectional Smaller than 60KS200C Types Hermetically Sealed Meets all environmental requirements of MIL-PRF-19500 Custom Configurations Available TX and TXV Screening Available APPLICATIONS: Protection of Voltage Sensitive Components Protection Against Power Interruption Lightning Protection Maximum Ratings (note 2) Stand Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Operating and Storage Temperature VRWM PD PPP 56 - 750 400 60,000 Volts Watts Watts SEE GRAPH SEE GRAPH -65C to +175C Note: SSDI Transient Suppressors offer standard Breakdown Voltage Tolerances of + 10% (A) and + 5% (B). For other Voltage and Voltage Tolerances, contact SSDI's Marketing Department PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE PEAK PULSE POWER (% Rated 25C Power) Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department. AMBIENT TEMPERATURE (C) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00014C DOC Solid State Devices, Inc. 14701 Firestone Blvd, La Mirada, Ca 90638 Phone: (562) 404-4474 Fax: (562) 404-1773 ssdi@ssdi-power.com www.ssdi-power.com STA60K79S thru STA60K100S Peak Pulse Clamping Voltage (Max) @ Current Tp=1ms (note 3) Maximum Continuous Current ELECTRICAL CHARACTERISTICS (note 2) Break Down (note 1) Part Number (note 4) Nominal Voltage Test Current Max Reverse Stand Off Voltage VRWM Volts 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 Reverse Leakage Current Max Temperature Coefficient VBR Volts STA60K79S STA60K89S STA60K98S STA60K107S STA60K110S STA60K127S STA60K135S STA60K150S STA60K167S STA60K180S STA60K202S STA60K226S STA60K245S STA60K279S STA60K305S STA60K340S STA60K360S STA60K390S STA60K450S STA60K490S STA60K510S STA60K560S STA60K620S STA60K680S STA60K750S STA60K820S STA60K910S STA60K1000S 79 89 98 107 110 127 135 150 167 180 202 226 245 279 305 340 360 390 450 490 510 560 620 680 750 820 910 1000 @IBRT mA 700 600 600 500 500 400 400 300 300 260 260 200 200 200 160 160 120 120 120 100 100 80 80 80 80 60 60 48 IR@VRWM A 6000 4800 160 80 60 40 16 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 VC Volts 145 150 160 175 185 195 210 230 250 270 300 335 360 400 435 470 520 550 600 650 700 780 870 930 1033 1135 1265 1385 IPP Amps 512 480 436 400 372 348 316 272 256 228 208 188 172 156 140 128 120 108 100 92 84 76 68 64 56 52 48 44 IRM Amps 5.00 4.60 4.08 3.80 3.44 3.08 2.80 2.40 2.20 2.00 1.76 1.56 1.44 1.24 1.12 1.04 0.96 0.84 0.72 0.70 0.68 0.64 0.60 0.52 0.48 0.44 0.40 0.36 TC %/C .03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .08 .09 PEAK PULSE POWER VS. PULSE WIDTH CURRENT PULSE WAVEFORM STEADY STATE POWER DERATING (% of 25C Rated Power) CASE TEMPERATURE (C) % PEAK VALUE PEAK PULSE POWER (kW) PULSE WIDTH For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2. Unless specified otherwise, ratings based on 25 C case temperature. 3. Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10ms X 1000ms waveform as defined by R.E.A.) DATA SHEET #: T00014C 4. Part Number- For 5% Voltage Tolerance, specify "B" in place of "A" STEADY STATE POWER |
Price & Availability of STA60K1000S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |